You may request a consultation by our specialist
Additives for warm mix asphalt DAD-TA
Description
Preparation «DAD-TA» («DAD-TA2», «DAD-TA2K» ) is a special energy-saving (temperature-reducing) additive, which allows to ensure workability and compacting of asphalt concrete mix with required physical and mechanical performance under adverse weather conditions.
It is used in the manufacture of warm asphalt concrete of all types, including SMA (stone mastic asphalt) according to GOST R 58831-2020.
Additives for warm asphalt concrete of our production
Additives for warm asphalt concrete of our production
Additive | Volume of injection | Description |
---|---|---|
0.3% (0.2-0.5%) | Temperature-reducing, energy-saving additive for reduction of preparation and sealing of ACM (asphalt concrete mixes) for 30-50° C with complete retention of quality characteristics. Active adhesion is the possibility of work with wet stone material. Thermal stability in bitumen: up to 3 days at 163°C. |
|
0.6% (0.4-0.8%) |
||
0.5% (0.3-0.7%) |
“DAD-TA” is a highly active liquid composition of surface active agent (SAA) based on polyamines.
“DAD-TA2” is a specially-modified surface active agent (SAA) of amphoteric type.
“DAD-TA2K” is a specially modified surface-active substance (surfactant) of cationic type.











Main advantages
[service title=”Laying in cold weather ” icon=”icon: thermometer-half” icon_color=”#102956″ class=”sk-service”] Sealing enhancement is especially important in cold weather conditions at the beginning and end of the laying season or during laying at night time. Warm asphalt concrete mixes can be laid at the ambient temperature of up to minus 10 ° C.[/service] [service title=”Extending range of mix transportation” icon=”icon: road” icon_color=”#102956″ class=”sk-service”] Owing to the fact that the additive provides the mix workability and allows to achieve higher density even at low temperatures – the problems connected with long distance transportation are reduced.[/service] [service title=”High active adhesion” icon=”icon: hubzilla” icon_color=”#102956″ class=”sk-service”] Lower temperature of mixing, which has become possible with application of technologies of warm mixes, can lead to the presence of some residual moisture in the asphalt concrete mix, which can prevent full coating of stone material, or in the future can lead to asphalt destruction under the influence of moisture. Active adhesion property acquired by bitumen due to the modification by additive, will allow to extrude water from the surface of stone material particles of modified asphalt concrete mix, which will ensure not only coating of stone material, but also formation of rigid chemical adherence (adhesion) between stone material and bitumen, which will be resistant to exposure to water. This excludes application of additional adhesion agents.[/service] [service title=”Reduction of asphalt concrete mixing plant energy consumption” icon=”icon: diamond” icon_color=”#102956″ class=”sk-service”] Due to decrease of operating temperatures in the proces of manufacturing of warm mix, fuel consumption used by the asphalt concrete mixing plant is reduced, which leads to significant energy saving.[/service] [service title=”Decrease of hazardous emissions” icon=”icon: leaf” icon_color=”#102956″ class=”sk-service”] Due to decrease of operating temperatures during warm mix laying, carbon oxide (CO2) and bituminous vapors emissions are reduced, which actually excludes hazardous emissions and odours.[/service]Packaging and storage
The preparation is delivered in metal barrels with a capacity of 216 l or 52 l and polymeric containers with a capacity of 1 m³.
The preparation is stored in transport package or in tightly closed and sealed packing containers. The preparation is stored in closed storage areas at a distance of at least two metres from heating elements at temperatures from minus 35 ° C to plus 50 ° C, in outdoor areas under a canopy, or in specially equipped heated containers.
Warranty storage period is 1 year from the date of manufacture.
Application technology
The preparation DAD-TA (or DAD-TA2, DAD-TA2K) can be injected into the working reservoir at the binder preparation stage, as well as directly into the line of bitumen feed to the mixer of the asphalt concrete mixing plant.
The preparation technology of bitumen modified by the additive includes:
- Heating-up of initial bitumen up to operational temperature
- Injection of DAD-TA preparation in the assigned amount
- Mixing to a homogeneous condition
Technical documentation
Specifications










Request samples

Request samples
